Ink blended diecut background

I have a confession to make. I love the big background dies that I see used everywhere now. Die cutting is so much fun and there's so much you can do with a background like this cover plate by Altenew. I just keep getting cheap and not getting them. I have another one by Winnie & Walter that is one of my favorite dies ever so I'm not sure why I keep being cheap. They are pretty pricey but so worth it. I splurged a bit and got this beauty and had a lot of fun fiddling with piecing these two cards together.



I think this white one is my favorite of the two. I used the speech bubble stamps by Winnie & Walter that I think is so fun! Black and white used together with bright colors are up in the top of the list of color combos in my book.

I will keep playing around with this die and maybe I'll get a few more after that. Now I want to create a shaker card using this one. I have a lot of ideas. I hope you will enjoy seeing more of this die ahead.

Sweet peas

I loved this Sweet Peas stamp set by Altenew right away, it looked super easy and fun to color. I used my Spectrum Noir Illustrator markers for these. Colors listed below.



I started by making this pink one. I wasn't sure what to do with the background but I ended up ink blending the corners and that made it look kind of dreamy. I really like the effect. I do have a super hard time blending though. Everyone says the distress Oxides blend like butter, but not for me. I'm probably doing something wrong because I get streaks that takes forever to blend out. But I love the look so it's worth the effort.



Since I stamped up two card fronts at the same time, in case I messed up, I made a blue card too. I actually have no idea what colors Sweet Peas come in. I have a vague memory I planted some the first summer after we got the house and they were soft pink. Would have been. If they had bloomed. I put them so close that there was a dense mass of greenery, so heavy it tipped the support I put up. And not a single blossom. Probably because I planted so many of them. I don't have a green thumb at all.

Anyways. Here are the colors of Spectrum Noir Illustrators I used for these two cards: FS1, FS2, PV3, PP4, TB1, TB2, TB3, YG1, YG2

Light up glitter vellum window

I made this card as a tutorial for Chibitronics, I think it turned out pretty good. If you would like full instructions on how to make it, pop on over to this post.

This card is super extra. I used more lights than I ever did on a card before, I had so much fun with it. And I think the glitter vellum window makes it special.



I used regular vellum and embossed it with WOW Neutral Ultra Shimmer embossing powder. I also added Nuevo Drops that's clear with glitter in it as an embellishment.

Unicorn with glowing rainbow

Today I'm up on the Chibitronics blog with this cute card! I used stamps, dies, and decorations from Uniquely Creative. I haven't shared the news here on the blog but I am now a member of their amazing design team. I fell in love with the quirky style of their stamps and dies. I mean look at this chubby unicorn, what's not to love???



I love the rainbow die cut, so I decided to light it up using Chibitronics. It makes the card even more magical, don't you think?



You can find a full step for step guide over at the Chibitronics blog.



The cutest little unicorn, and to light the rainbow up you squeeze his little butt, LOL!

Have a lovely day and thanks for stopping by!

Chibitronics and Winnie & Walter bloghop

Today I'm part of a collaboration blog hop between two of my absolute favorite companies in the craft world. Chibitronics and Winnie & Walter. I have stalked followed Winnie & Walter since the start and I adore their wonderful products. And I found the perfect sets to pair up with some fun Chibitronic lights and effect stickers.



You can enter the giveaway by commenting on the blog posts along the way. You have until 11:59 PM CST next Tuesday, May 29th in order to be eligible for the giveaways.  Chibitronics are giving away a $30 starter kit so you have everything you need to start making fun interactive cards with lights. Winnie and Walter are giving away a $30 gift certificate for you to spend on their lovely products. Good luck!



I totally fell for the birthday themed stamp set called Wish Big with Evelin T Designs and I found some dies, In a Word: Birthday Tiles Cutaways, that was to die for. Sorry, couldn't resist it! The big birthday words were perfect to make a window with lights behind with and to add some extra fun I used a blinking effect sticker.

[wpvideo xquE1aaR]

To use an effect sticker is not hard at all. Just connect the negative side of the battery to the - on the effect sticker and then on to the - on the LEDs. The + side of the battery (the top) goes to the + on the effect sticker. Then another connection from blink on the effect sticker and to the + side of the LEDs. My picture of the inside was after the foam tape was added and it looks super messy so I drew a picture of the connection instead.



The switch is of the type you pull out to start the lights. I have gotten the idea from Eiko on the Chibitronics team, it's pretty brilliant, here's a picture from a previous card to show you what it looks like.



So the switch is in the shape of an X and the copper tape goes around it to connect both sides of the cut circuit. I find that it doesn't drain the battery as easily because there is no connection before you want it. A regular push switch sometime connects when something is put on top of it or when you mail the card.



Now hop on to the incredible Vanessa Amann and see what she came up with.

If you get lost on the way, here's a list of all the stops. Have fun!

Chibitronics Blog
Jessica Frost-Ballas
Eiko Uchida
Kelly Szafron
Wei Wei Wang
Kelly Griglione
Tiffany Au
Lesley Oman
You are here ---> Maya Isaksson
Vanessa Amann
Gayatri Murali
Heather Hoffman
Jessica Lin
Kate Capper
Keren Baker
Lea Lawson
Lydia Evans
w&w blog

Chibitronic supplies used:
Red, Yellow, Blue MegaPack (30 stickers)
Circuit Stickers Effects Add-On
Copper Tape
Conductive Fabric Tape Patches

World autism day blog hop

Today I and the Chibitronics team is part of a bloghop for Autism awareness and we are lighting it up blue. April 2nd is the World Autism Awareness Day and the color blue is often used as a symbol together with the puzzle piece.

I think most of us are somehow connected to someone with autism, through friends or family. They are all amazing individuals in their own unique way and have a different perspective of the world that can be pretty fantastic. That's why I selected the sentiment Don't forget to be awesome. And of course, I lit it up blue using the blue Chibitronic LEDs.



To make the card I stamped and colored the front panel and cut out the balloons that are going to light up. To color it I used a couple of Distress Oxide inks and smooshed the background in them, focusing mainly on the bottom of the card where the dog would be stamped. I used my Misti to stamp the dogs in blue. I then colored the dogs using Spectrum Noir Illustrator markers in cool greys with pink for the cheeks. Then I added some Sparkle to some of the areas, glaze for the noses and eyes, and some white accents.

I also marked where the switch would be placed and sketched in the circuit.



As usual, I did everything backward and had to flip the battery. I added a fabric patch to make sure the copper tape won't break if it moves around a bit. I later added a piece of printer paper under it to make sure the tape wouldn't touch both sides of the battery. If I had put the battery the right side it would not have been necessary.



As usual, I forgot to take a picture when doing the switch. Basically, I just cut the paper using a craft knife. Added the switch I used fabric patches again on the inside of the switch and the edge of the paper where the switch is attached. I did this to make sure the copper tape doesn't break from sliding back and forth. Better safe than sorry. You can see the strip of printer paper here too.



Here's the back of the switch, you can see the sliding mechanism.



I glued the finished card to a card base and added some Nuvo Drops to make it a bit more fun. I love these adorable pups by Mama Elephant.



And here's the card all lit up. I hope you hop on to see the other cards on the hop. You can find links to the rest of the team creations on the Chibitronics Blog post. I hope you enjoyed this card and the short tutorial.

Supplies used for this card:

Chibitronics:

• Red, Yellow, Blue MegaPack (30 stickers)


• Copper Tape


• Conductive Fabric Tape Patches

Spectrum Noir Illustrator Markers: IG 1, IG2, IG3, IG6, IG7, IG10 FS4

Spectrum Sparkle: Macaroon, Moonlight, Clear Overlay

Stamps: Mama Elephant - The Dog's Woof

Glow up fireflies

[gallery ids="4800,4799,4797,4796" type="square"]

Today I'm up on the Chibitronics blog, showing how to make this fun card. I used LEDs and Glow in the Dark embossing powder by WOW! and they make such a fun card. I absolutly had to get the Lawn Fawn fireflies as soon as I saw them, I knew they would make a super fun light up card.

To see the full instructions check Out this blog post at the Chibitronics blog.

I'm a lucky duck

I totally fell in love with the new Lawn Fawn release so I went a bit crazy when I visited my favorite store. These cute ducks had to move home with me and I love the mini picture frames and the peekabo backdrop. Naturally I combined all of them, more is more, right?



The inside complete the sentiment so the whole thing reads I'm a lucky duck to have a friend like you.



I made the backgrounds to the frames using Distress oxides, I colored the ducks using my Spectrum Noir Illustrator markers (FS6, FS9, BO2,PP4, IG1) and added some patterned papers as wallpaper behind the frames. I added details with a white gel pen and some Glossy Accents to beeks and feet.

Thanks so much for stopping by, I hope to be back soon with another project.

Light up windows with colored LEDs

I had so much fun doing the Chibitronics - MFT stamps blog hop this Friday. If you haven't hopped along yet you can find the post here. There's still time to hop today. If you leave comments along the way you can win prizes, and there are some pretty awesome projects along the way.



Anyway, today I blogged this card on the Chibitronics blog. If you hop on over there you will get the full photo tutorial and a nifty trick how to hide copper tape in narrow spaces.



The houses are a cut file by Pretty Crafty Stuff, you can find the link in the sidebar. I'm thinking about making some new designs for the shop. I haven't made any in a long time and I have some ideas. I'm also happy to get suggestions on new files. I can't promise anything but if I get inspired I might just cook up a new batch.

I'll get back to nursing my cold and feeling sorry for myself now. Maybe I'll watch some Olympics, so far Sweden is doing pretty great :) Are you watching? What are your favorite sports in the winter Olympics? I enjoy watching figure skating and alpine sports but my husband is mainly watching curling. It's a bit slow for my taste.

 

Chibitronics and MFT Stamps bloghop

Hi everyone! Time for another collaboration blog hop and this time with one of my absolute fav companies MFT Stamps. They have so many fun stamps and dies! If you leave a comment on this post you could win a shopping spree at MFT Stamps or a starter set from Chibitronics. The more posts you comment on the more chance you have to win.



I used this lovely llama set called Llama Love and the coordinating dies for my focal image. I adore llamas and there are a lot of fun plants and texts to go with them.



When you pull the tab the stars light up and the hidden text is revealed. Fun, right?



Here are the parts needed to make this kind of card. You need a card front and cut out a slit for the text to show up under. Save the cutout piece as you will need it later. Die-namics Surf & Turf has a perfect slit to use for this.

You will also need a cover to hide the circuit under the slit. I stamped my message on this and it will be revealed when sliding out the switch to light up the stars.

The circuit is built on a separate piece of cardstock and I'm using a sliding switch for this card. It's basically an x-shape that goes through a slit in the paper and connects the copper tape both in the back and front when the switch is slid to the right position.

I also made another long piece to attach to the switch. The cover plate goes between this and the switch and this is what slides away to reveal the hidden message under it.



Here's a close up of the circuit. It's just a regular circuit with three lights and a switch, it's just a bigger slider to show off the message and move the llama to the other side of the card.



I added some foam tape to the switch to make sure the connection is good, as well as around the card. I didn't get a photo of the next step but I just attach the blank cover to the foam tape and the right outer side of the slider to the slider and backing. Then I attached the card front on top using glue, just making sure not to put any glue where the slider is moving.



No probllama, right? I hope you enjoyed this card tutorial and that you have fun on the hop. You can find the list below and don't forget to leave a comment for a chance to win!

 



Chibitronics Blog
Vanessa Amann
Tiffany Au
Maya Isaksson <- This is me :)
Eiko Uchida
MFT Blog

Supplies that can be handy for making a card like this:

• Copper Tape 


• Pink, Orange, Green MegaPack (30 stickers)


• Llama Love


• Die-namics Llama Love


• Die-namics Surf & Turf


• Die-namics Stitched Mini Scallop Rectangle STAX

Light up shaker card

I can't believe that 2017 is almost over, it just swished by so fast. I really look forward to seeing what 2018 is going to be like, I think there will be a lot of crafting going on at least. We'll see. As I got to blog on one of the last days of this year I decided to make a new years themed card. It turned into a shaker card that lights up. I glitter embossed the backing panel so the lights would reflect the sparkles. I think it turned out pretty fun.



You can find the full instructions on how to make it over at my post at the Chibitronics blog. 



I hope your 2018 will be the best year ever. I wish you all the best and see you next year!

Supplies used:
Chibitronics Starter Kit w/ Circuit Sticker Sketchbook

OR

White LED Stickers Pack
Copper Tape